Bodybuilders always include plenty of dumbbell exercises in their
routines, but quite a few strength athletes avoid them completely. If
they use them at all, they relegate the dumbbells to auxiliary exercises
and use light weights. I'm a big fan of dumbbells, both light and
heavy. They're most useful to all serious strength athletes, as well as
those who only train for general fitness, and they're invaluable for
rehab. What's more, for people who train alone, they're extremely
beneficial, since you don't need a spotter.
Ideally, you'd train at a facility that features a long row of
dumbbells, which allows you to select the poundage you want easily.
There are lots of different types of dumbbells. The solid-iron models
come in various shapes: round, square, hexagon and rectangular high-tech
versions that you grip inside the weights. There are models that use
plates secured with bolts or welds, and I guess we've all used the
adjustable ones and ended up dumping plates on the floor, or our
feet, when we didn't fasten the collar tightly enough. Those made like
small Olympic bars are my favorite because you can add Olympic plates to
them. They revolve like an Olympic bar, which makes them so much easier
to handle. They're great for people who have home gyms and don't want
to invest in an assortment of dumbbells.
I incorporate dumbbells in all of my strength programs, on both
auxiliary and primary exercises. Two strength exercises that Olympic
weightlifters used to do with heavy dumbbells were cleans and clean and
presses. They used them to improve pulling and pressing power, and the
dumbbells really got the job done. It was a true test of strength to be
able to clean 200-pound dumbbells and press them. It still is, although I
seldom see anyone doing that exercise anymore. In my 15 years of
strength coaching at three universities, only four of my athletes
managed to clean and press the 100-pounders. That's four out of almost
2,500, which makes it a rare feat indeed.
More often than not it's the clean that keeps them from making the lift.
I believe that athletes have to be able to power clean close to 300 in
order to clean a pair of 100-pound dumbbells and have enough juice left
for the press, unless they're exceptional pressers, and there aren't many
of those around.
When I trained at the York Barbell Club in the '60s, the overhead press
was still required in Olympic weight lifting, and there were quite a few
who could clean and press 100-pound dumbbells. That's as heavy as the
dumbbells went, so when we wanted a real challenge, we rolled the Cyr
dumbbell out of the Hall of Fame into the gym. It weighed 220. Now, that
isn't a great deal of weight, but it wasn't the weight but, rather, the
density of the monster that made cleaning and pressing it difficult two
thick spheres connected by a thick, stumpy handle that was too short to
grip with two hands. You had to clean it with one hand, and then the
spheres were turned and set in position for the press. Because of its
bulk, there was no way to cheat-start it. You had to elevate it overhead
with raw power.
Barski and Bill March were the only two lifters I ever saw press the Cyr
dumbbell. I never did, though it wasn't for lack of trying. One
afternoon Gary Glenney and I got into a contest. With a protein shake at
stake we applied all our energy to the task. We cleaned it 13 times,
but neither of us could lock it out. I determined that a person had to
be able to press 350 off the rack in order to handle it. March and
Barski were both doing that and more.
Whenever I write about pressing heavy dumbbells, I think about Jim Witt,
one of the pioneers in the sport of powerlifting and a very strong
individual. We trained together at the Dallas Y, and he told me this
story. For a time he worked as a traveling salesman in east Texas, and
when he came to a new town on a training day, he would seek out the
local gym. He carried a pair of 60-pound dumbbells and a pair of 80s in
the trunk of his car, and before going in the gym, he'd pull them out
and do few warmup sets in the parking lot. Then he'd walk into the gym,
go directly to the dumbbells, grab the 100's and proceed to
clean and press them. He said he was never asked to pay for training.
And in the event that some small town didn't have any sort of training
facility, he'd carry the dumbbells into his motel and use them for his
workout.
After the overhead press was dropped from Olympic lifting, interest in
pressing heavy dumbbells waned. In fact, trainees stopped doing almost
all forms of pressing, which in my opinion was a huge mistake. Cleaning
and pressing dumbbells or a barbell is an excellent way to build size
and strength in the shoulders. No other upper-body exercise can really
match it, and I think using heavy dumbbells is even better than using a
bar because it's so much harder. The dumbbells require much more control
than a bar, which forces different muscles to get into the act,
especially the ones that have to stabilize the dumbbells to keep them
from running into each other or to the side.
Another nice thing about cleaning and pressing dumbbells is that you can
do it in a limited amount of space, even in an apartment, and, as
mentioned above, you don't need any assistance.
Cleaning and pressing dumbbells can also be beneficial for those who
lift weights as part of their total conditioning program and not
primarily to gain size or strength. You don't need heavy weights. If you
only have light dumbbells, just run up the reps. You can clean the
dumbbells and press them 30 or 40 times, or you can turn this simple
exercise into an excellent cardio workout. Clean the weights, press them
overhead, set them back on the floor and repeat: clean, press, clean,
press. Do that for 20 or more consecutive reps, and I guarantee that
you'll be blowing at the end even if you only use 15-pound dumbbells.
Some lifters at York only cleaned the dumbbells. They didn't bother to
follow with any presses because they were more interested in enhancing
their pulls. Cleaning heavy dumbbells is very effective and much more
difficult than cleaning a barbell. Dumbbells have to be guided in the
correct line from start to finish, and unlike what happens with a bar,
you have to control them laterally. If you start a bar off the floor and
keep it in the proper position through the middle of the movement, the
top will generally take care of itself. Not so with dumbbells. You have
to pull them all the way to your shoulders. There's no float time, as
there is with a bar. You also have to pull dumbbells a bit higher than a
bar, since it's extremely hard to dip under them as you would a bar. In
addition, the traps don't play nearly as much of a role at the finish
with dumbbells. It's the deltoids more than the traps that provide the
final punch at the top. That means your delts receive more attention
than they do on cleans performed with a bar, which is good. Increase
deltoid strength while maintaining strong traps, and when you go back to
cleaning a bar, your top pull will be more dynamic.
You also have to deal with two weights in motion rather than one. If
your arms aren't in perfect coordination, you'll have trouble racking
the dumbbells at the same time. If one arm is weaker than the other, the
disparity will show up once you get to the heavy weights. The same
thing holds true for pressing heavy dumbbells, but that's a plus.
Discovering a weaker area is always good in strength training because
then you can do something about improving it. When I see an athlete with
a glaring weakness in one of his arms, I have him do several sets of
presses or pulls using that arm. Over time the weaker arm catches up
with the stronger one.
A few of us at York did one-hand snatches with dumbbells, though not
nearly as much as we did two-handed cleans. Power-snatching dumbbells
works well for the same reasons that dumbbell cleans do. You're forced
to pull the weights higher and control them all the way to the finish.
While the line of fire is precise, as it is on cleans, since you're only
using one dumbbell, the exercise is a bit easier. There can be no
hesitation or period of relaxation, or the weight will crash downward
like a guillotine. And as with the power cleans, power snatches done
with dumbbells build stronger deltoids, particularly the hard-to-hit
rear delts.
Heavy dumbbells are great for improving the start of the flat bench. You
can go lower using dumbbells than you can with a bar, and that involves
the muscle groups that are responsible for driving the weight off your
chest. I prefer dumbbells to a cambered bar. The amount of weight used
with dumbbells is restricted because you have to clean them, lie back,
get positioned on the bench and then do the presses. Even if you have
two people hand you the dumbbells, you're still not going to be able to
handle a great deal of weight. Quite often lifters can use as much
weight with a cambered bar as they can on a straight bar the very first
time they do them, and that ends up being harmful to their shoulders.
It's too much too fast. The shoulders are really rather delicate and
need time to adapt to new stress.
Aside from the pure-strength exercises, dumbbells are useful for
enhancing overall fitness. They're especially beneficial for older
athletes who have accumulated a host of injuries over the years and may
have had surgery on one or more joints. Using light-to-moderate
dumbbells for higher reps will feed blood to the joints while
strengthening the muscles without aggravating the joints. And even if
you haven't had surgery, switching to a dumbbell routine for a short
period is a smart idea if you've been pounding your joints with heavy
weights and low reps for a long time. Using dumbbells for higher reps
will give your joints a much needed rest, and when you go back to a
pure-strength routine, they'll be better prepared for the work ahead.
One of the reasons I decided to write about dumbbell training was that
several months ago I received a letter from an older athlete asking for
some advice. Arthritis in his shoulders prevented him from racking the
bar on his back, which meant he could no longer do squats or good
mornings, two of his mainstays. He wanted to put off surgery as long as
he possibly could and asked if I could suggest a program that would work
his entire body. He added that flat benches hurt his shoulder a great
deal, but he was able to do deadlifts if he didn't go too heavy.
He listed the equipment in his home gym: squat rack, combination flat
and incline bench, slant board, Olympic bar, 500 pounds of weights and
three sets of dumbbells: 20s, 30s and 40s.
I assured him that he had more than enough equipment to get in a full-body workout and recommended that he try using dumbbells for all his exercises for a while, with the exception of deadlifts. For legs I suggested squats, using a variety of stances, wide, regular, very narrow, walking lunges and one-leg calf raises. For the shoulder girdle it was flat-bench, incline and overhead presses; dips holding a dumbbell between the legs; standing lateral and front raises; bent-over lateral raises; straight-arm pullovers; triceps kickbacks; a variety of curls, regular, hammer and reverse, performed while standing, seated or on the slant board. For back I listed cleans, one-hand snatches, upright rows, bent-over rows and shrugs.
I told him to try all of those, and if any of them hurt his shoulders or
any other bodypart, he should drop it and substitute something else. He
didn't have to do all of them. If walking lunges hurt but squats
didn't, that was fine because he could still work his hips and legs. He
had mentioned that he wanted to train six days a week, since exercise
helped his arthritis. I suggested that after he found out what exercises
he could do, he should set up two programs and alternate them from
workout to workout. Each routine was to have at least one exercise for
the three major muscle groups: shoulder girdle, back, and hips and legs.
A month later I received another letter from him. He said he was really
enjoying his new program. One routine consisted of deadlifts, inclines,
pullovers, curls, front raises, bent-over rows, back hyperextensions and
situps. The other included squats performed with the three stances,
flat benches, overhead presses, dips alternated with triceps kickbacks,
calf raises, lateral raises, reverse hypers and leg raises. He did
everything for three sets of high reps and moved through them in a fast
circuit. He was pleasantly surprised to find that he could do
flat-benches with dumbbells without hurting his shoulders. He simply
turned his hands to a position that didn't bother his shoulders. All his
shoulder pain had disappeared, and he believed the bent-over rows were
the most responsible for that. He said he planned on staying with the
dumbbell routine, since it was providing him with exactly what he
wanted.
Keep in mind that any exercise you can do with a barbell you can also do
with dumbbells. The only exceptions that I can think of are full cleans
and full snatches. I guess you could do them, although I've never seen
it.
Dumbbells fit into every strength and fitness program. They allow you to
get in extra work, add to your weekly workload and improve weak areas
without tapping into your strength reserves too much. You accomplish
that by doing one or two dumbbell exercises at the end of the
workout, just a couple of sets for higher reps. If you try to hit the
major muscles with more than one core exercise, you'll become
overtrained in a hurry; that is, unless you happen to be very advanced.
You can, however, get away with working the smaller groups with lighter
weights and higher reps. That activates the muscles more so than the
attachments, which is what you want.
It's a smart idea to have some dumbbells at home even if you train at a
commercial gym. On your non-gym days you can hit a couple of areas that
might benefit from extra work. That's what Dr. Gourgott did. On the days
he didn't go to the gym, he would run, then do a series of arm or
shoulder exercises with dumbbells. The auxiliary work added to his
weekly load without affecting his next workout in the gym.
So, if you haven't been using dumbbells, give them a try. And if you
happen to be in the mood to change your entire program, dumbbell
training may be the way to go.
No comments:
Post a Comment